The small end of the family is the 19 ft electric slab machine and the compact 26 ft above it, hired for interior work where the deck has to fit through doors and stay off a customer's floor. Expect roughly $95 to $160 a day and $300 to $450 a week for a 19 ft unit, with the narrow deck versions at the top of that band.
Width is what people mean by small
Deck heights cluster at 19 and 26 ft, so the real choice at this end is width. Standard 19 ft machines run about 32 inches across and clear most commercial doorways; narrow versions come in near 30 inches for a residential door or a shop aisle. Measure the tightest gap on the route, including the turn at the end of it.
Weight is the other constraint
A compact electric scissor lands somewhere near 2,500 to 3,500 pounds carried on four small wheels, which is a point load a mezzanine, a raised floor or an old basement slab may not accept. Ask the branch for the machine weight and the wheel loading, and clear it with whoever owns the structure before delivery day.
Non marking tyres and the finished floor
These machines are ordered for finished interiors, so non marking tyres are standard on most models and worth confirming on the ticket anyway. The other floor risk is a hydraulic drip under a parked machine. A drip tray or a sheet of hardboard costs nothing and heads off the one charge nobody budgets for.
Charging, and how a day gets lost
These are battery machines. A flat pack takes most of a night to recover, so the first hire day is the day to find a socket the site will let you use. Yards send them out charged, but a unit that has sat on a trailer for a week may not be, and a lift that quits at ten still bills for the day.
Questions people ask about small scissor lift rental
What is the smallest scissor lift available to rent?
The compact 19 ft electric machine is the usual floor of the range, and some branches hold a 12 to 16 ft micro scissor around 30 inches wide for retail and residential interiors. Below that the counter will steer you towards a vertical mast lift or a podium step instead.
Will a small scissor lift fit in a standard elevator?
Sometimes, and only if you check three numbers first: the door opening, the car floor area and the car capacity. A narrow 19 ft machine near 2,600 pounds is beyond a great many passenger lifts. Freight lifts are usually the answer, and the building manager gets the final word.
Do I need a licence for a small scissor lift?
There is no consumer licence to buy. Employers must train and authorise their operators, and the delivery handover is a familiarisation on that model rather than a certificate. A homeowner working on their own property should read the manual stored on the platform before raising it the first time.